HOMEWORK 1
MATERIALS MIND MAP.
Following the lessons demonstration and instructions, you are to put the following list of materials into the correct categories and sub sections of a mind map.
You are to use A3 paper (supplied), and this paper is to have a fancy border in colour of your chosen design no greater than 20 mm.
In the bottom right hand corner you should construct a box 20mm high and as long as is necessary to print your full name in capital letters, central both horizontal and vertical, exactly 16 mm high.
The centre of the page should show the TITLE “MATERIALS”, as colourful and large as you like.
Spidering off this central title you should have SECTIONS from the list below, naming the different categories of materials. Some categories will also have SUB-SECTIONS attached. I suggest you use a different colour for each category.
Underneath the sections and sub-sections you are to list, in the correct places each material that I have named in the list. Again, I suggest you use a different colour for each category.. Please note, a couple of the materials listed may be listed in more than one category.
|
Acrylic |
Alder |
Alloys |
Aluminium |
Araldite |
|
Ash |
Bakelite |
Balsa |
Beech |
Blockboard |
|
Boxwood |
Brass |
Brick |
Bronze |
Cast iron |
|
Cedar |
Cellulose based |
Cement |
CERAMIC |
Cherry |
|
Chestnut |
Chipboard |
Clay |
Copper |
Cork |
|
Cotton |
Denim |
Diesel |
Ebony |
Elastic |
|
Elm |
Emulsion |
Eucalyptus |
Ferrous |
Fibreglass |
|
Fir |
Glass |
Gold |
Hammerite |
Hard |
|
Hardboard |
Hickory |
Iron |
Larch |
Lead |
|
Leather |
Linseed oil |
LIQUIDS |
Mahogany |
Manmade |
|
Maple |
MDF |
Mercury |
METAL |
Molybdenum |
|
Non ferrous |
Non thermal |
Nylon |
Oak |
Oil based |
|
PAINTS |
Paraffin |
Pear |
Perspex |
Petrol |
|
Pine |
PLASTICS |
Plywood |
Polyethylene |
Polypropylene |
|
Polystyrene |
Polyvinyl chloride |
Poplar |
Pottery |
Pure metals |
|
PVC |
Rapeseed oil |
Reed |
Rubber |
Sand |
|
Silver |
Soft solder |
Spruce |
Steel |
Straw |
|
Sycamore |
Teak |
Teak Oil |
TEXTILES |
Thermo |
|
Thermo setting |
Tin |
Tungsten |
Turpentine |
Veneer |
|
Water |
Water based |
Willow |
WOOD |
Wool |
|
Wrought iron |
Yew |
Zinc |
|
|
You may add to this list if you can.
MARKING SCHEME
Border 10 marks
Name neatness 5 marks
Central Title 10 marks
Subsections 10 marks
1 mark will be deducted from the remaining 65% for each material in the wrong category.
Homework should be handed in, on or before the next Friday's lesson. Work handed
in on time will be rewarded with one from the set of 25 Reward Cards. This set
of Reward Cards is titled "Workshop Tools" and will be limited to a print run of
100 complete sets. Anyone gaining 90% or more for this homework will gain 1
commendation and 1 Reward Card. Anyone gaining 100% will gain 1 commendation, 1
Certificate and 2 extra "Reward Cards.
© Paul Skelton