DESIGN PROJECT H

Pinball Machine.

An electronics company have acquired an order for a brand new Pinball machine. You have been asked to design the table graphics.

Using A3 paper, you will need a border, your name in the bottom right hand corner and the following design criteria:-

The title of this folio is PINBALL MACHINE and should be in neat letters of your chosen style/font in the top-middle of the A3 paper.

Divide your paper into two halves by using a line/border down the middle under the title. You should now have two frames in which to work.

The left hand frame should contain a rectangle 150mm wide by 230mm tall. This is the working table and inside this rectangle you will place your designs. The designs must contain flippers, pop-bumpers and side bumpers. There will be no ramps or tunnels on this table.

The right hand frame should have a square 170mm by 170mm. This is the scoring screen above the table. The machine should allow a maximum of four players to play at once and have no more than 5 digits each. You should choose a font style to compliment the table. For example, the four scores should read the following:-

1. 13579

2. 24680

3. 54321

4. 67890

The graphics on both the left and right hand table layout must be in full colour using pencils only. Felt tip pens and biros are not allowed. Computer graphics may be used but the table must not be a copy on one already in existence.

Marking scheme.

Border 5 marks for design, 5 marks for neatness

Name 5 marks for neatness

5 marks for correct size of designs

20 marks for the design, neatness and colour of numbering

30 marks for design, layout, colour, neatness of table

30 marks for design, layout, colour, neatness of scoring screen.

BACK